考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

装备表面现代维修保养技术研究

结合装备表面智能维修保养技术方面的研究成果,介绍了装甲装备故障智能检测技术、自适应、自修复功能材料,装甲装备器材全自动保养设备等先进技术,侧重装备维修保养阐述了如何提高信息化程度,推进军队武器装备维修保养技术的现代化建设。     

基于有限元模型的机枪结构动态特性仿真

在对机枪进行结构设计时,了解机枪的固有频率和射击载荷作用下的动态响应特性对整个武器射击精度的影响十分必要。利用有限元分析软件对某机枪模型进行模态仿真分析,进而得出该武器对射击精度影响较大的部件。同时对机枪在射击载荷作用下的动力响应特性进行仿真计算,阐述了在机枪结构设计时频率匹配、射向一致的必要性,为机枪结构动力修改提供了理论依据。     

参数化滤波器逼近问题的全局最优算法

基于Lipschitz下界估值和分枝定界技术,给出了一维参数化小波滤波器逼近问题的全局最优算法。由于充分利用了滤波器逼近问题的特点,本方法将原来的Lipschitz算法的线性收敛速率提高为二次收敛速率。     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于接触的捞雷具夹紧爪接触面形状优化

介绍了在捞雷具夹紧爪设计过程中引入的基于接触的有限元形状优化设计方法.传统的机械设计方法仅考虑了零件的几何尺寸,而对其形状的设计却考虑不够,导致设计结果不理想.文中将基于接触的有限元形状优化方法应用于传统的机械设计过程.对捞雷具夹紧爪建立基于有限元分析的优化设计模型,使夹紧爪既能满足打捞鱼雷的要求,又得到了优化的形状.结构的特性与受力状况均得到改善.     

破片模拟弹侵彻钢板的有限元分析

根据破片模拟弹侵彻钢板的实验研究,采用MSC.Dytran对破片模拟弹侵彻钢板的侵彻过程、侵彻特性、钢板的破坏模式以及弹体的侵彻速度、靶板的侵彻阻力进行了有限元分析,并将分析结果与实验结果进行了比较.分析结果表明,破片模拟弹冲击钢装甲的侵彻过程可大致分为初始接触、弹体侵入、剪切冲塞和穿甲破坏4个阶段.有限元分析的破片模拟弹侵彻特性及靶板破坏模式与实验观测结果有较好的一致性,在靶板破口的正面,与弹体平面凸缘两端接触的部分,变形以剪切为主,而与切削面接触的部分,以挤压变形为主;靶板破口背面为剪切冲塞破坏;有限元模拟的弹体剩余速度与实验结果吻合较好,弹体侵彻过程中弹靶作用界面的速度和侵彻速度近似呈线性变化.有限元分析结果还表明,采用适当的模型,有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式.     

Excess capacity in weapons production: An empirical analysis∗ †

This paper analyzes a set of observations by the Congressional Budget Office (CBO) on individual weapons systems regarding whether large amounts of excess capacity exist and whether short run average cost (SRAC) appears to be severely decreasing. It is shown that the amount of excess capacity and steepness of SRAC are essentially independent of output rate. It is then argued that this suggests that production is occurring in inefficiently large plants—i.e.—off the long run cost curve.     

塔架摆杆系统静动态特性研究

为研究航天发射塔架摆杆系统的静动态特性,利用Pro／E建立其三维实体模型,再将模型导入Abaqus中建立其有限元模型并对该塔架摆杆系统进行静、动态分析计算．通过静态分析,得到塔架关键部位的应力及位移值,对其安全性进行了校核;通过动态分析得到其固有频率及振型,与试验所得频率进行对比,验证有限元建模的正确性．